LIQUID FLOOR SCREED
Floor screed solutions based in Bridgend
At Haulfryn Liquid Screeding, we offer liquid floor screeding for customers in Wales and the South West. Our liquid screed is easy to install and affordable. Get in touch with us
now for more information.
CONTACT US
Topflow Screed A
Topflow Screed A is made with a recycled source of gypsum (calcium sulphate) rather than cement. It has a free-flowing fluid consistency and is applied by pump.
DOWNLOAD PDF
Floors are suitable for foot traffic within just 24-48 hours, while drying takes just 40 days, or sooner with force drying (available after only 7 days). Typical drying times are 1mm per day for depths of 40mm and 0.5mm per day for depths above 40mm.
Benefits
1. Fast installation
Free flowing Topflow Screed A can be laid in areas of up to 2000m2 in just one day. It is suitable for foot traffic within 24-48 hours while partitions can be erected just seven days after placing.
2. High strength
Stronger than sand cement screed, Topflow Screed A requires no reinforcement and no manual compaction.
3. Flexible choices
New build and renovation work. Unbonded, bonded or floating construction. Residential and commercial. With or without underfloor heating. Whatever the requirement, Topflow Screed A gives you greater project flexibility
4. Low shrinkage
Topflow Screed A is less prone to shrinkage than sand cement screeds and therefore requires fewer construction joints.
5. More sustainable
Topflow Screed A doesn’t contain any cement and has an overall recycled content of 36%.
Applications
• For use with under floor heating
• Unbonded, bonded or floating floor construction
• Ideal for both new build and renovation work
• Suitable for all residential and commercial floors carrying pedestrian traffic within BS 8204
• Compatible with most acoustic resilient systems due to its uniformed compaction, creating 80kg/M2 at 40mm depth
Topflow Screed C Belitex
A cement based, free flowing screed that can be laid quickly, trafficked after just 24-48 hours and dries within 14-21 days. Topflow Screed C Belitex is a solution that provides you flexibility in installation and your overall build programme. We also offer a polished version of the Belitex liquid screed which can be left as a finished floor.
DOWNLOAD PDF
Benefits
1. Massively reduced drying times
Topflow Screed C Belitex dries within 14 – 21 days versus a minimum of 40 – 75 with other traditional or flowing screed products and it can take foot traffic after just 24-48 hours. This means that floor coverings can be applied sooner.
2. Fast & easy installation
Up to 120m2 can be laid in 45 minutes versus a whole day with traditional screed plus there is no working on your knees when installing as with traditional screed. There is also no need for sanding the surface afterwards.
3. High strength
Stronger than traditional screed, no reinforcement or manual compaction is required.
4. Lower depths
Topflow Screed C Belitex can be laid in thinner depths than traditional screed.
5. Low shrinkage
Comparable shrinkage with other flowing screeds therefore large areas of up to 250m2can be laid without the need for jointing making the application of floor coverings much simpler.
6. Quality
Excellent SR2 smooth level surface produced.
7. Flexible
Topflow Screed C Belitex has a greater workability open life when installing and is compatible with any type of underfloor heating system, cementitious adhesive and floor covering. It is also suitable for wet room applications. The solution also gives you more flexibility with your build scheduling since it can be installed later in the programme due to its reduced drying time.
8. Cost savings
Save money on self leveller and underlay due to the SR2 flat surface created.
Topflow Screed Excelio
Topflow screed Excelio offers the unique ability to install a 12mm bonded screed whilst gaining the benefits of a readymix, factory produced product. This greatly improved productivity and reduces site labour and operations compared to traditional SLU. 1m of Excelio replaces seventy 25kg bags of pre blended material and eliminates the associated site mixing.
Benefits
• Self compacting
• Self curing
• Can be walked on in 24-48 hours
• Can be loaded after 7 days
• No reinforcement required
• Dehumidifiers can be used after 72hrs to aid drying
• Dries at 1mm per day up to 30mm in good drying conditions
• Can achieve SR1 finish as described in BS8204 - Site Dependant
• Protein free - cannot harbour harmful bacteria
• Non combustible (tested to BS476 Part 4)
• Minimal Thermal expansion (0.012mm/mK)
• Environmentally friendly
Topflow Screed Thermio
Benefits
Topflow Screed A Thermio+ is the only screed with a guaranteed thermal performance.
This technology coupled with an underfloor heating or cooling system guarantees pipe encapsulation and an emitter which will give;
• Performance – up to 30% increase in the thermal emission value for maximised performance of the underfloor heating system
• Comfort – up to 80% thermal diffusivity for a much faster ramp-up in temperature, greatly improving immediate and long term comfort
• Savings – up to 8% savings on heating bills
• Programme efficiency – 20 day reduction in
drying times when compared to conventional
flowing screeds
• All the normal benefits of Topflow Screed A
products
• Very high fluidity for fast installation
• Minimum SR2 surface finish
• Greatly reduced cracking and no curling
• Maximum bay size 300m2
• No reinforcement
• No need for a curing membrane
• Typically 36% recycled content
TOPFLOW 35 SELF COMPACTING CONCRETE
Every project is different. Some are more technical, others more aesthetic. Whatever the challenge, all must be completed on time and on-budget. While conventional compacted concrete has its limitations with placement often requiring considerable manpower, machinery and time, Topflow provides solutions, fast.
Highly fluid, Topflow is the ultimate self-compacting concrete. It can be poured quickly, flowing and spreading effortlessly to provide an exceptional, highly aesthetic finish. It’s not just time and money that can be saved; Topflow also reduces noise and eliminates vibration, considerably improving conditions on site.
With no fewer than 11 different mixes, Topflow provides flexible solutions for everything from horizontal applications to complex vertical constructions.
Benefits
1. Fast flowing
Free flowing Topflow concrete can be placed fast, with the material consolidating easily and effortlessly into the required pour locations.
2. Easier placement
Placement is not just fast, it’s easy. Fewer pour points, less formwork, reduced manpower, no vibration, excellent surface finish and flexible applications make Topflow easy to work with to speed up your construction schedule.
3. No vibration
By eliminating vibration and greatly reducing noise pollution, working conditions on-site are greatly improved, while pours can be safely carried out even in built-up environments.
4. Smoother surfaces
Topflow provides an excellent, smooth surface quality that can be laid perfectly flat for slabs and floors, eliminating the need for floating.
